SCOREBOARD OPERATOR

Time Clock Instructions

TURNING ON THE CLOCK

1. Turn the power switch on
2. Both rinks have a main switch in the back room that is usually on. If the scoreboard won’t turn on, check this switch.
3. RINK 1 - The switch is next to the control panel on top of the table.
4. RINK 2 – Plug in the loose cord into the outlet on the wall.
5. Wait for the control panel to say, “Enter Code”.
6. Press “#62” and “ENTER"
7. The readout will now say “1/10 second?”
8. Press “ENTER” again.

Setting Game Time

• Hit the SET MAIN CLOCK button.
• Type in the time and hit the ENTER button.
• (Ex. 5 minutes, type in 5000. Check the display on the scoreboard control)
• To run the time hit the START button.
• To stop the time hit the STOP button.
• To enter the periods, hit the PERIOD+ button until you have the desired period on the scoreboard.
• To reset the time after a period hit the SET TIME button and then the ENTER button. The previous period time will be entered automatically. If you need to enter a different time length repeat steps 1 & 2 with the new time.

Entering Penalities

• Hit the PLAYER/PENALTY button.
• Hit the ENTER button.
• Type in the player number.
• (This will not show on some scoreboards)
• Hit the ENTER button.
• Type in the penalty time.
• (Ex. A 1:30 penalty, hit 130. Always double check the scoreboard control display)
• Hit the ENTER button.

Removing Penalties

• Hit the PLAYER/PENALTY button.
• Hit the UP-ARROW key until the penalty you need to remove shows on the scoreboard control display.
• Hit the CLEAR button.
• Hit the ENTER button.